Blog Archives

Piping and Duct work Installations

9/30/2014

Proper installation of piping systems and duct systems is very crucial for comfortable living conditions in a home.

We ensure the proper building and designing of the system right from the blueprints. We look into the technical design as well as the asthetics and placements of the ducts around the home. For any successful implementation it is important to maximize the system for the building. To do this, we take a long look at the use, frequency, layout of the building structure and other elements that come into play. We also keep in mind the final expectation of the customer. In our 20+ years of experience we have often seen that most systems are oversized for a residence. Poorly designed piping and duct work leads to high costs in the long run as any enhancements will entail a redesign of the existing system and huge invasive changes to the layout of the structure.
Given all these reasons, it is highly advisable to design a sound and proper duct and piping system right from the beginning to avoid these circumstances.

Involve your HVAC team very early on when building your dream home and it will give you years of peace and savings.

0 Comments

HVAC presence during the Design and Build process

9/30/2014

0 Comments

Not everyone understands that HVAC is very closely tied to the design process of a new home. We understand that building and a HVAC system mesh together. We work with the entire structure and find the best solution that works for the entire structure. HVAC should be involved in any design/build process. Work with the builders and the owners to come up with the best solution. Design, Build, and Installation. We want to be part of the process.
An architect might be very skilled in his process

0 Comments

When to replace your AC / Boiler / Furnace

9/30/2014

2 Comments

Not entirely sure if you need to replace your AC, boiler or furnace? Read below and then decide for yourself.

Your heat pump or air conditioner is more than 10 years old. Installed correctly, a newer high-efficiency unit can save up to 20 percent on heating and cooling costs.
Your furnace or boiler is more than 15 years old. Replacing an old furnace or boiler will only help you reduce your heating costs because the latest units are much more energy efficient.
Your equipment needs frequent repairs and your energy bills are going up.Your cooling or heating equipment my have become less efficient and hence the need for frequent repairs. This is one of the first signs that you should be replacing your existing units.
Some rooms in your home are too hot or too cold. Improper equipment operation, duct problems or inadequate insulation could be the cause. We not only replace the main units but also analyze very closely the venting system and can identify potential leaks or problems in your vent insulation.
Your heating or cooling system is very noisy. This too is one of the first signs of problems to come. However, if your unit is not too old, we can also investigate and fix the root cause for the noise inconvenience.

2 Comments

Piping and Duct work Installations

HVAC presence during the Design and Build process

When to replace your AC / Boiler / Furnace

Highwood Mechanical

Archives

Categories